Pro Concrete Design Concrete Polishing, Concrete Staining & Epoxy Coatings
StructureScan™ Mini Series - Complete GPR Systems for Concrete Inspection and Analysis
GPR Systems for Concrete Inspection and Analysis
Handheld GPR systemCompact Design
The StructureScan Mini makes concrete inspection easy in tight spaces

Integrated Tool
All-in-one concrete inspection tool - antenna, positioning system and control unit combo

System Flexibility
The StructureScan Mini is offered in two versions, the original system with our popular 1600 MHz antenna, or the new system with a 2600 MHz antenna for high resolution data

Durability
Ruggedized plastic casing and wheels for long-lasting performance

Value
The perfect blend of price and performance, backed by a two-year warranty

1. All-in-One handheld GPR system
2. Ergonomic handle and controls
3. Easy to use operator interface with color display screen
4. Survey wheel encoder
5. Guiding laser for locating



StructureScan Mini Series
Introducing the Mini - our smallest StructureScan system. The StructureScan Mini Series is ideal for locating the position and depth of rebar, conduits, post-tension cables, and voids in concrete. The high resolution, LED backlit 5.7” display provides a detailed image of the subsurface structure. In addition to viewing, the data image can be stored directly to a SD-RAM card for later playback, or transferred to a computer for printing or integration into a report.

The StructureScan Mini Series offers a lightweight alternative to other GPR systems, weighing in at just over three pounds. The small size of the unit makes it easy to transport to the job site and once on site, convenient to scan around obstacles and into tight spaces. The Mini is very easy to use – new users will become proficient in a few short hours. The Mini aids in target detection by marking the data on screen with a small dot when characteristics of rebar or conduit are identified. The lasers on the side of the unit indicate the exact location of the center of target for accurate marking of targets embedded in the concrete.

StructureScan Mini - Deeper Signal Penetration
The StructureScan Mini is GSSI’s portable integrated GPR system for concrete inspection. This handheld unit is used to locate rebar, conduits, post-tension cables, voids and determine concrete slab thickness.

Data showing a small 5/8" plastic conduit (less visible) over rebar mat. Small 1/2" conduits (less visible) very close to surface. Note strong horizontal reflection, representing bottom of slab.
With a 1600 MHz antenna, and depth penetration of up to 20 inches (50cm), the StructureScan Mini offers the perfect blend of data resolution and depth. Used worldwide, it has quickly become the standard for concrete imaging. Additionally, the StructureScan Mini is available with 2D or 3D capabilities, flexible for your job site needs.

System Specifications
Center Frequency: 1600 MHz
Depth Range: Up to 20 inches (50 cm)
Unit Weight (with battery): 3.3 pounds (1.6 kg)
Dimensions: 6 (w) x 7 (h) x 9 (l) in. (15.24 x 17.78 x 22.86 cm)
Languages: English, Spanish, French
Environmental: IP-65




StructureScan Mini HR
The StructureScan Mini HR is GSSI’s all-in-one high-resolution GPR system for concrete inspection. With a 2600 MHz antenna, this handheld system locates rebar, conduits and post-tension cables in depths of up to 16 inches (40 cm).

The StructureScan Mini HR is available in two models; 2D, for real-time target location and 3D, for an x-ray like image. Ideal for complex areas, the StructureScan Mini HR can delineate small targets with superior vertical and horizontal resolution.

Typical Uses for StructureScan Mini Series
• Concrete inspection – locate metallic and non-metallic targets in walls, floors and ceilings
• Structure inspection – bridges, monuments, walls, towers, tunnels, balconies, garages, decks
• Condition assessment – map relative concrete condition for rehab planning
• Measure slab thickness
• Void location
Data showing a small 5/8” plastic conduit over rebar mat. Collected with StructureScan Mini HR, data represents 3D image of radiant heating tubing in concrete slab. Small 1/2” conduits very close to surface. Note sharp hyperbola tails.

System Specifications
Center Frequency: 2600 MHz
Depth Range: Up to 16 inches (40 cm)
Unit Weight (with battery): 3.3 pounds (1.6 kg)
Dimensions: 6 (w) x 7 (h) x 9 (l) in. (15.24 x 17.78 x 22.86 cm)
Languages: English, Spanish, French
Environmental: IP-65


Software Solutions
RADAN© for StructureScan Mini


RADAN for StructureScan Mini is specifically made for the StructureScan Mini Series. It is designed to process, view, and document 2D data collected with the StructureScan Mini. RADAN for StructureScan Mini can perform the following functions:
• Copy images to third party software for documentation purposes
• Save images
• Print to all Windows supported printers
• Background Removal filtering
• Establish Ground Truth for near accurate depth calculation
• Dielectric calculation
• Colorize the data
• Add targets and export target information in an Excel format
• Gain (contrast) control

RADAN® 7
RADAN is GSSI’s post-processing software for GPR data. With its modular design, RADAN allows users to select the processing functions that best suit their professional needs. RADAN is Windows based, providing a familiar and easy to use environment for all levels of experience.

The RADAN software features bold and intuitive menu screens and clear data views for easier interpretation and enhanced post-processing capabilities.

Screen shot of RADAN 7 3D Module; three-dimensional image of a rebar mat.
StructureScan Module - This powerful module allows for easy creation of plan-view slices to aid in interpretation of StructureScan data files.
• Semi-automatic mapping of reinforcement locations and depths on simple concrete structures

3D Module - Process, view, and document 2D or 3D data with the 3D module, which provides enhanced 3D viewing options in a single dialog
box. Users can stretch, shrink or zoom in on files as desired for customized presentation results.
• Interactive 3D mapping of conduits or other subsurface features within concrete structures

StructureScan Mini Viewer
The StructureScan Mini Viewer software is a free online visualization program for the GSSI StructureScan Mini. The software is ideal for basic post processing of 2D StructureScan Mini data files.

Systems Include
StructureScan Mini or StructureScan Mini HR
Dual Battery Charger
Two Batteries
Hand Strap
Transit Case
Quick Start Guide
Training Video
Data collection grids (3D system)
2-year warranty


Copyright © 2012 Geophysical Survey Systems, Inc.

Call Now! Call us now at 816-356-6440 and get a free estimate!
We offer professional concrete polishing, epoxy coating, decorative concrete and concrete staining in all of Northwest Missouri including: Kansas City, Raytown, Independence, Blue Springs, Lee's Summit, Liberty, Kansas City North. And Northeast Kansas including: Kansas City, Kansas, Overland Park, all of Johnson County, Kansas, Lenexa, Olathe, Leavenworth, Shawnee Mission.

© Copyright 2005-2016 Pro Concrete Design, Inc., All Rights Reserved.
816-356-6440 • 2462 NW Tullison Rd • Riverside, Missouri 64150
Web design by Big Ape Studios.